In order to add an idler hub (no brakes) to the Timbren Heavy-Duty Axle-Less Trailer Suspension part # TASR35HDS06 you'd need to use either the Dexter Trailer Idler Hub Assembly part # 8-213-5UC1-EZ which has a 6 on 5-1/2" bolt pattern or the Dexter Trailer Idler Hub Assembly part # 8-231-9UC1-EZ which has a 8 on 6-1/2" bolt pattern. Please note, if you go with the former you'll need a different grease seal, the Grease Seal part # GS-2250DL.
I have attached some of our wheel/tire options... view full answer...
The best replacement option we have for an Atwood G6A-7 Water Heater (Gas Only, 6 Gallon, Manual Pilot) is the Dometic/Atwood RV Water Heater part # DMC74FR (Gas or Electric, 6 Gallon, Auto Pilot). This is one of the few models that will run on electric also so you can save your propane when at a campgound with electric hook ups. This is also fits in a smaller openind so you will need the Dometic # DMC84FR door and fit kit. view full answer...
I really wish we had a diagram or a way to pull up where it'd be. Most likely under the overhang near the landing gear jacks as that's the most popular place. Check there first and then trace the wiring from the breakaway switch to see where they go as they will lead to the battery. view full answer...
Go To Results